- Stainless steel construction
- Removable bowl
- Ribbed bowl (3 inner ribs)
- Adjustable speed: 0 to 50 RPM
- Adjustable bowl angle
- Programmable modes
-
PRE-ORDER NOW! The Truffly Made Panner Candy Coating Machine is a tumbler for coating gummies and other type of candies. Easy operation: Pour any type of coating sugar into the Panner opening, add your gummies or candy, turn the Panner on, adjust the speed (RPM) then START. Each cycle will take approximately 60 seconds to be properly coated - then use a 10 inch sifter to recover the coated gummies. Specifications: Table-top Design Panner Bowl capacity is 60 lbs (30 liters) Machine size is 31" wide x 24" deep x 24" high Capacity per cycle is Approx. 20kg (44lbs) Bowl size is 24" diameter, 12" front to back Machine weight is 175 lbs. Electrical specs 110 volts, 750 watts, 3.6 amps -
Candy Mold Specifications: 3.0ml Gumdrop Mold - 80 Cavities Reference: TM-GD-080 Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 10 x 8 Cavities Per Mold: 80 Cavity Size: 20 x 18 x 12 mm (0.78" x 0.70" x 0.47” ) Cavity volume: 3.0 mL (0.10 fl oz) Approximate Weight: 3.5 – 4.0 grams (0.12 – 0.14 oz) -
Appropriate and recommended to lubricate Pistons and O-rings- NSF H3 Registered
- Temperature Resistant up to 356F / 180C
- Colorless & Non Staining
- Eliminates Binding & Sticking
- Waterproofs & Cleans
- Protects and Lubricates Metal to Metal, Plastic to Plastic and Plastic to Metal
- Does not leave sticky residue overtime
-
Candy Mold Specifications: 1.85ml Drop Mold - 80 Cavities Reference: TM-DP-080 Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 10 x 8 Cavities Per Mold: 80 Cavity Size: 12.5 x 14 mm Ø (0.49" x 0.55” Ø) Cavity volume: 1.85 mL (0.06 fl oz) Approximate Weight: 2.0 – 2.5 grams (0.07 – 0.09 oz) -
Digital Control Unit for the Semi-Automatic Depositor New compact Digital Control Unit with dual LED panels for independent adjustment of the hopper and nozzle temperature settings. Requires heating panels with coordinating multi-pin connectors. -
Candy Mold Specifications: 8ml Lined Brick - 80 Cavities Separation lines with 10 portions Reference: TM-LB-080 Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 10 x 8 Cavities Per Mold: 80 Cavity Size: 27.5 x 22.5 x 15 mm (1.08 x 0.88 x 0.59”) Cavity volume: 8.0 mL (0.27 fl oz) Approximate Weight: 9 – 11 grams (0.31 – 0.38 oz) -
PRE-ORDER NOW! . The Automatic Depositing Tower Rack System comes with the 20 liters Automatic Depositor for Chocolate, Gummy, Caramel, Hard Candy and more! Each Tower Rack is on heavy duty caster wheels and can effortlessly be rolled around on any surface even when fully loaded.- Load up to 28 molds in each Tower Rack
- Connect the Tower Racks to the middle table on which the Automatic Depositor is sitting
- Fill the hopper of the Automatic Depositor with your product, then start the cycle.
- The system will run autonomously during the entire cycle - No supervision required.
- It will take from 10 to 20 min (depending on mold layout and volume per cavity) to fill all molds that will be automatically recovered and stacked in the second Tower Rack.
-
The pin fittings can be added on the original pins of the Universal Candy Demolder to increase the diameter and improve efficiency of unmolding with larger cavity size molds such as Button 80, Diamond 80, Rounded Triangle 80, or custom molds. Food contact safe and easy to clean using dish soap and hot water. Pins fittings are easy to add on and can be removed for cleaning purposes. Pack of 80 Pin Fittings -
Introducing our comprehensive solution for crafting premium Cannabinoids or Nutraceuticals-infused gummy products!- Expertly formulated recipes paired with kitchen design services. Our lab-tested gummy formulas have been meticulously developed to deliver consistent potency, exceptional flavor, and a satisfying texture. Whether you're a seasoned confectioner or new to the edibles market, our recipes always ensure reliable results.
- Paired with our kitchen design services, which seamlessly integrate Truffly Made's state-of-the-art depositing machines, you'll have everything you need to streamline production and elevate your gummy-making process. From layout optimization to equipment selection, our team will work hand in hand with you to create a tailored solution that maximizes efficiency and productivity.
- Start your project the right way by trusting our knowledge and experience in creating irresistible Cannabinoids or Nutraceutical-infused line of products that stand out in taste, quality, and appeal.
-
Additional / replacement Lever Ball for the Universal Depositor and XL Universal Depositor NOT suitable for the Compact Universal -
Approved New Jersey State Symbol Approved Universal Use
Candy Mold Specifications: 3.2ml Rounded Triangle - 80 Cavities Regulated State: New Jersey Reference: TM-RT-THC Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 8 x 10 Cavities Per Mold: 80 Cavity Size: 23 x 23 x 9 mm (0.90 x 0.90 x 0.35”) Cavity volume: 3.2 mL (0.11 fl oz) Approximate Weight: 3.5 – 4.2 grams (0.12 – 0.15 oz) -
Candy Mold Specifications: 3.2ml Rounded Triangle - 80 Cavities Reference: TM-RT-080 Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 8 x 10 Cavities Per Mold: 80 Cavity Size: 23 x 23 x 9 mm (0.90 x 0.90 x 0.35”) Cavity volume: 3.2 mL (0.11 fl oz) Approximate Weight: 3.5 – 4.2 grams (0.12 – 0.15 oz) -
Approved New Jersey State Symbol Approved Universal Use
Candy Mold Specifications: 3.5ml Mini Ball - 80 Cavities State Regulated: New Jersey Reference: TM-MB-THC-NJ Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 8 x 10 Cavities Per Mold: 80 Cavity Size: 21 x 21 x 11 mm (13/16 x 13/16 x 8/16”) Cavity volume: 3.5 mL (0.12 fl oz) Approximate Weight: 4 – 4.5 grams (0.14 – 0.16 oz) -
Approved New Jersey State Symbol Approved Universal Use
WITH IMPRINT LOGO Candy Mold Specifications: 4.5ml Rounded Square Mold - 80 Cavities State Regulated: New Jersey Reference: TM-RSE-THC Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 10 x 8 Cavities Per Mold: 80 Cavity Size: 20 x 20 x 12 mm (13/16 x 13/16 x 3/4”) Cavity volume: 4.5 mL (0.15 fl oz) Approximate Weight: 5.5 – 6.5 grams (0.15 – 0.23 oz) -
NOW IN STOCK! Fully Electric! Plug & Play Anywhere - No Compressed Air Required The Automatic Candy Demolder is designed to remove a full sheet of candies from molds in one “pop”. Unmold your trays in second! Ideal for Hard Candy, Gummies, Caramels, Chocolate, Caramel, Taffy and more! The automatic mold “Popper” includes one standard mold frame to match the Truffly Made mold you are using. Please note that molds are not included. Custom mold plates are available for additional 1,699 USD to work with your silicone molds* Unmolding Rate: 15,000+ pieces per hour Adjustable Speed Dimensions: 27.16” W x 38.58” L x 27.56” H*The Automatic Candy Demolder is compatible with most Truffly Made molds and Non-Truffly Made molds as long as the cavities can be popped inside-out completely and minimum 8mm spacing between each cavities.
Maximum cavities per mold = 80
Maximum Mold size = 11.5 x 15”
Please contact info@trufflymade.com for a custom quote LARGE PIN FITTINGS AVAILABLE HERE ☜ Please select the type of mold you are using from the list, All Truffly Made molds listed are compatible with the demolder. For any silicone mold not listed, or is from a different manufacturer, please contact us before placing an order to verify compatibility. -
Hex Key Set to fit screws on the Universal and Automatic Depositors. Remove and replace screws when servicing the Universal and Automatic Depositor. Set of 7 Hex Keys
-
Replacement Screws for Automaic Depositor ONLY Replacement screws for attaching the Automatic Depositor transporter unit to body. 2x front, 2x side and 4x rear. Pack of 8 screws
-
Approved Colorado State Symbol Approved Ohio State Symbol Approved Florida State Symbol Approved Universal Use
Candy Mold Specifications: Reference: TM-HX-THC Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 8 x 10 Cavities Per Mold: 80 Cavity Size: 23 x 25 x 10 mm (0.90 x 0.98 x 0.39”) Cavity volume: 5.5 mL (0.19 fl oz) Approximate Weight: 6.0 – 7.0 grams (0.20 – 0.24 oz) -
Candy Mold Specifications: Reference: TM-DD-080 Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 8 x 10 Cavities Per Mold: 80 Cavity Size: 13 x 20 x 8 mm (0.51" x 0.78" x 0.31") Cavity volume: 2.0 mL (0.07 fl oz) Approximate Weight: 2.5 - 3 grams (0.08 - 0.11 oz)
-
Candy Mold Specifications: 4ml Rounded Square Mold - 80 Cavities Reference: TM-RSE-080 Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 10 x 8 Cavities Per Mold: 80 Cavity Size: 20 x 20 x 12 mm (13/16 x 13/16 x 3/4”) Cavity volume: 4.5 mL (0.15 fl oz) Approximate Weight: 5.5 – 6.5 grams (0.15 – 0.23 oz)
-
Sale
IN STOCK - READY TO SHIP ✅ BUNDLE DEAL INCLUDES 30 MOLDS OF YOUR CHOICE Ideal for novice and experienced operators! Truffly Made XL Universal Candy Depositor For Gummies, Caramel, Hard Candy. The Truffly Made, XL Candy Depositor For Gummies, Caramel, Hard Candy is designed to remove the burden of filling multiple cavity candy molds while increasing the accuracy and uniformity of filling each mold. It works with both low heat confectionery mixtures such as chocolate and ganache, as well as high heat recipes such as gummies, taffy, caramel and hard candy. Filling Capacity: 5,000+ hourly For More Information: info@trufflymade.comPlease Select Your Molds Below Before Adding to Cart
⬇⬇⬇
-
Set of two additional white melamine trays for the Universal Depositor. ONLY FITS Universal, XL and Push & Go Depositors.
-
Replacement Screws for Universal Depositor, XL Depositor, Semi-Automatic Side Panels Screws located on both side of the depositor to hold the panels. 2 screws on each side. Pack of 8 screws
-
Replacement Rubber Feet for Universal Depositor, XL Depositor, Semi-Automatic and Compact Depositor Also compatible for Control Unit Rubber Feet located on the bottom (6) and back (4) of the depositor. Pack of 10 Rubber Feet How to apply:
- Remove old rubber feet
- Clean surface area with isopropyl alcohol
- Apply new rubber feet by peeling the back of the 3M double sided tape
-
A Set of 8 additional Pistons for the Truffly Made Universal Depositor, XL Depositor or Semi-Automatic Depositor. Included: Heavy Duty Nozzles Pistons includes o-rings and valve stopper.
-
A Pack of 2 Additional Pistons for Universal & Semi-Automatic Depositor Including Heavy Duty Nozzles Piston includes o-rings, valve stopper and standard nozzle
-
What’s included:
- Industry Standard recipes and formulas that fit your needs.
- Recipes Developed to be used with all Truffly Made Universal Depositors.
- Gelatin or Pectin Gummy Recipe, Candy Recipe, Caramel, Chocolate Recipe, Hard Candy, Edible Recipe
- Include special ingredients, CBD, THC …
- Wellness focused products, nutritional and flavor requirements
- Consideration for quality, shelf life stability, water activity, production goals and operation with Universal Depositors
- Over 25 years experience in the confectionery industry
- Testing provided by third-party - Great Plains Analytical Laboratory
-
Candy Mold Specifications: Reference: TM-NX-080 Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 8 x 10 Cavities Per Mold: 80 Cavity Size: 21 x 16 x 15 mm (0.82 x 0.63 x 0.59") Cavity volume: 4 mL (0.13 fl oz) Approximate Weight: 4.5 - 5.0 grams (0.14 - 0.18 oz)
-
Approved Colorado State Symbol Approved Ohio State Symbol Approved Florida State Symbol Approved Universal Use
Candy Mold Specifications: 3.5ml Mini Cube - 80 Cavities Candy Mold State Regulated: Colorado, Ohio, Florida Reference: TM-MC-THC Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 10 x 8 Cavities Per Mold: 80 Cavity Size: 20 x 20 x 9 mm (0.78 x 0.78 x 0.35”) Cavity volume: 3.5 mL (0.12 fl oz) Approximate Weight: 4.0 – 4.5 grams (0.14 – 0.16 oz) -
Candy Mold Specifications: Reference: TM-SH-080 Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 8 x 10 Cavities Per Mold: 80 Cavity Size: 28.5 x 29 x 12mm (1.12 x 1.15 x 0.47") Cavity volume: 3 mL (0.11 fl oz) Approximate Weight: 3.5 - 4.5 grams (0.12 - 0.16 oz)
-
Approved Massachusetts State Symbol Approved Maine State Symbol Approved Universal Use
Candy Mold Specifications: 3ml Mini Cube - 80 Cavities Candy Mold Separation Line State Regulated: Massachusetts, Maine Reference: TM-MC-THC80 Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 10 x 8 Cavities Per Mold: 80 Cavity Size: 20 x 20 x 8 mm (13/16 x 13/16 x 5/16”) Cavity volume: 3 mL (0.10 fl oz) Approximate Weight: 3.5 – 4 grams (0.12 – 0.14 oz) -
Universal Candy Demolder is designed to remove a full sheet of candies from molds in one “pop”. Demold your trays in second! Ideal for Hard Candies, Gummies, Caramels, Chocolate and Fruit Jelly! The mold “Popper” includes one standard mold frame to match the mold you are using. Please note that the mold is not included. Custom mold plates are available for additional 911 USD to work with your silicone molds. Dimensions: 19.75” w x 19.25” L x 8.25” H
The Universal Demolder is compatible with most Truffly Made molds and Non-Truffly Made molds as long as the cavities can be popped inside-out completely and minimum 8mm spacing between each cavities.
Maximum cavities per mold = 80
Maximum Mold size = 11.5 x 15”
Please contact info@trufflymade.com for a custom quote LARGE PIN FITTINGS AVAILABLE HERE ☜ Please select the type of mold you are using from the list, All Truffly Made molds listed are compatible with the demolder. For any silicone mold not listed, or is from a different manufacturer, please contact us before placing an order to verify compatibility. -
Candy Mold Specifications: 4ml Triangle Mold - 80 Cavities Reference: TM-TG-THC Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 8 x 10 Cavities Per Mold: 80 Cavity Size: 25 x 29 x 10 mm (1 x 1.14 x 0.39”) Cavity volume: 4 mL (0.13 fl oz) Approximate Weight: 4.5 – 5.5 grams (0.15 – 0.19 oz)
Approved New York State Symbol
Approved Universal Use -
Candy Mold Specifications: Reference: TM-BN-080 Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 8 x 10 Cavities Per Mold: 80 Cavity Size: 21.5mm Ø x 9.5mm (0.85 Ø x 0.37") Cavity volume: 2.5 mL (0.085 fl oz) Approximate Weight: 3.0 - 3.5 grams (0.10 - 0.12 oz)
-
What’s included:Do you need a recipe to help you cross the finish line? Do you want your gelatin or pectin gummies to have a one-year shelf life? We offer our customers a formula that has been tested to achieve this. 3rd party lab tested for the following categories: Microbiology: Water activity, pH levels, moisture Chemistry: Aerobic Plate Count (APC) / Yeast & Mold (Y&M) Sensory Evaluation: Oder, Color, General Appearance, Packaging Integrity Conclusion: The recommended shelf life for the Gummy recipe is at least 12 months in the final Mylar packaging The samples where tested upon receipt and after 3,6,7,8,9,10,11 and 12 months of storage. Full Analysis Testing Available Upon Request- Full recipe and detailed procedure, PDF Format
- Ingredients and small wear equipment list + suppliers info, PDF Format
- Video tutorial “step by step” with detailed verbal explanations
- 1h consultation via phone or video call with our Recipe development specialist
- 10 Silicone Molds Included
- Additional information regarding infusion method.
- Turn-key operation with Universal Depositor
- Testing provided by third-party - Great Plains Analytical Laboratory
-
What’s included:Do you need a recipe to help you cross the finish line? Do you want your gelatin or pectin gummies to have a one-year shelf life? We offer our customers a formula that has been tested to achieve this. 3rd party lab tested for the following categories: Microbiology: Water activity, pH levels, moisture Chemistry: Aerobic Plate Count (APC) / Yeast & Mold (Y&M) Sensory Evaluation: Oder, Color, General Appearance, Packaging Integrity Conclusion: The recommended shelf life for the Gummy recipe is at least 12 months in the final Mylar packaging The samples where tested upon receipt and after 3,6,7,8,9,10,11 and 12 months of storage. Full Analysis Testing Available Upon Request
- Full recipe and detailed procedure, PDF Format
- Ingredients and small wear equipment list + suppliers info, PDF Format
- Video tutorial with detailed verbal explanations
- 1h consultation via phone or video call with our Chef, confectioner
- 10 Silicone Molds Included
- Additional information regarding infusion method.
- Turn-key operation with Universal Depositor
- Testing provided by third-party - Great Plains Analytical Laboratory
-
Candy Mold Specifications: Reference: TM-JB-080 Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 8 x 10 Cavities Per Mold: 80 Cavity Size: 23 x 14 x 16 mm (0.90 x 0.55 x 0.63") Cavity volume: 3.0 mL (0.10 fl oz) Approximate Weight: 3.5 - 4.0 grams (0.14 - 0.16 oz)
-
Heavy Duty Nozzle Ring for Piston - Universal Depositor 6 mm diameter opening x 60 mm long Recommended to use with high viscosity products such as Caramel, Taffy, Hard Candy and Pectin Gummy Large chamber diameter 6mm allow products with higher viscosity to be dispensed while applying less pressure within the piston assembly. Facilitate the operation with high temperature products; the Heavy Duty Nozzle Ring for Piston is made out of high grade stainless steel that retain maximum heat and prevent product to seize or solidify within the chamber during production. Suitable for Truffly Made Universal Depositors. NOT SUITABLE FOR AUTOMATIC AND COMPACT DEPOSITOR
-
Sale
IN STOCK - READY TO SHIP ✅ BUNDLE DEAL INCLUDES 30 MOLDS OF YOUR CHOICE ($2,152.4 Saving) Ideal for novice and experienced operators! The 8 Pistons Semi-Automatic Candy Depositor for chocolate, gummy, taffy, caramel and hard candy is designed to work with all the Truffly Made silicone molds and most polycarbonate molds up to 11.5 inches wide, it delivers accurately metered fillings with great flexibility. Stainless steel construction with adjustable depositing nozzles that can be easily positioned to each mold layout. The Semi-automatic Depositor comes with a complete heating system with temperatures ranging from 68F to 320F. Filling Capacity: 12,000 - 15,000 hourly For More Information: info@trufflymade.comPlease Select Your Molds Below Before Adding to Cart
⬇⬇⬇
-
Reference: TM-RD-080 Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 8 x 10 Cavities Per Mold: 80 Cavity Size: 27 dia x 22 mm (1.06 dia x 0.86”) Cavity volume: 11 mL (0.37 fl oz) Approximate Weight: 13 - 15 grams (0.45 - 0.53 oz)
-
In this collection of Depositor Maintenance videos we are teaching you how to properly maintain your Universal Depositor 6L and XL.All new spare parts can be purchased HERE ☜Each video explains in detail how to replace several components of the depositor such as:.- Rotating Discs Replacement- Front Bar Level- Cables for Control Unit Replacement- Hydraulic Pump ReplacementEach topic explicitly shows and demonstrate how to operate and list the appropriate tools to be used.
-
The pin fittings can be added on the original pins of the Universal Candy Demolder to increase the diameter and improve efficiency of unmolding with larger cavity size molds such as Macaron 80, Petit Cube 80, Mini Square 80, or custom molds. Food contact safe and easy to clean using dish soap and hot water. Pins fittings are easy to add on and can be removed for cleaning purposes. Pack of 80 Pin Fittings
-
Candy Mold Specifications: Reference: TM-DC-080 Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 8 x 10 Cavities Per Mold: 80 Cavity Size: 15 x 15 x 15 mm (19/32 x 10/32 x 19/32") Cavity volume: 3.5 mL (0.12 fl oz) Approximate Weight: 4 - 4.5 grams (0.14 - 0.16 oz)
-
. IN STOCK - READY TO SHIP Ideal for novice and experienced operators! The 8 Pistons Semi-Automatic Candy Depositor for chocolate, gummies, taffy, caramel and hard candy is designed to work with all the Truffly Made silicone molds and most polycarbonate molds up to 11.5 inches wide, it delivers accurately metered fillings with great flexibility. Stainless steel construction with adjustable depositing nozzles that can be easily positioned to each mold layout. The Semi-automatic Depositor comes with a complete heating system with temperatures ranging from 68F to 320F. Filling Capacity: 5,000 - 8,000+ hourly For More Information: info@trufflymade.com
-
1000 Lollipop Sticks - 10 bags of 100 each Size: 100mm x 3.5mm (3.94" x 0.14") Material: High quality wood fiber pulp, safe, 100% natural and recyclable; certified for use with food High-quality food-grade paper sticks, environmentally friendly and tasteless, safe and hygienic, won’t rub off or fall apart. PRODUCTION METHOD: Set lollipop sticks into the dedicated slots on the Truffly Made Lollipop 24 mold; pour the hard candy into the mold directly from the pot, using a funnel or the Universal Depositor, wait for the candy to cool, then take it out!
-
100 LOLLIPOP STICKS INCLUDED PER MOLD Additional Sticks available HERE ☜ Candy Mold Specifications: Reference: TM-LP-024 Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 4 x 6 Cavities Per Mold: 24 Cavity Size: 33 round x 10 mm (1.30" x 0.40") Cavity volume: 8 mL (0.27 fl oz) Approximate Weight: 11-12 grams (0.39-0.43 oz)
-
Replacement Large Discs for the Universal Depositor and XL Universal Depositor Set of 2 discs for right and left side Comes with graduation measure tape. NOT suitable for the Compact Universal
-
.
ON-SITE CONSULTING FEE IS PER DAY
2 Days minimum RequiredOur consultant will come to your facility to help you, train your team and give your precious advice for the development of your products, standard operation procedures and more.
Travel and lodging are included in price. Does not include price of the recipe.
Recipe development or adjustment must be purchased prior booking On-Site consulting -
NEW Approved Nevada State Symbol Approved Universal Use
Candy Mold Specifications: 2.25ml Mini Square - 80 Cavities State Regulated: Nevada Reference: TM-MS80-THC Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 10 x 8 Cavities Per Mold: 80 Cavity Size: 25 x 15 x 6 mm (1 x 3/4 x 1/4”) Cavity volume: 2.25 mL (0.075 fl oz) Approximate Weight: 3 - 3.5 grams (0.10 - 0.12 oz) -
The Truffly Made Silicone Mat is designed to be placed under the tray of the Automatic Depositor by the nozzles to allow easy cleaning and care of the transporting unit base Reference: TM-MC-AM Mold Size : 216 x 340 mm (8.5” x 13”) Mold Layout: N/A Cavities Per Mold: N/A Cavity Size: N/A Cavity volume: N/A
-
Appropriate and recommended to lubricate Pistons and O-rings- NSF H1 Registered
- Colorless & Non Staining
- Eliminates Binding & Sticking
- Waterproofs & Cleans
- Protects and Lubricates Metal to Metal, Plastic to Plastic and Plastic to Metal
- Does not leave sticky residue overtime
-
Candy Mold Specifications: Reference: TM-PK-012 Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 8 x 10 Cavities Per Mold: 80 Cavity Size: 21 dia x 10 mm (13/16 x 3/8”) Cavity volume: 3.5 mL (0.12 fl oz) Approximate Weight: 4 – 4.5 grams (0.14 – 0.16 oz)
-
Candy Mold Specifications: Reference: TM-HX-012 Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 8 x 10 Cavities Per Mold: 80 Cavity Size: 23 x 25 x 10 mm (0.90 x 0.98 x 0.39”) Cavity volume: 5.5 mL (0.19 fl oz) Approximate Weight: 6.0 – 7.0 grams (0.20 – 0.24 oz)
-
Set of 3 Cables for the Truffly Made Universal and XL Depositor’s heating panels Connecting heating panels and heater block to Control Unit Not Suitable For Automatic Depositor -
The Truffly Made Silicone Mold Mat is designed to cover all the Truffly Made molds and protect the filling from moisture and humidity. Reference: TM-MC-001 Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: N/A Cavities Per Mold: N/A Cavity Size: N/A Cavity volume: N/A
-
Candy Mold Specifications: Reference: TM-OV-012 Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 9 x 6 Cavities Per Mold: 54 Cavity Size: 27 x 17 x 15 mm (1- 1/16 x 11/16 x 9/16”) Cavity volume: 12 mL (0.04 fl oz)
-
Candy Mold Specifications: Reference: TM-MP-008 Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 9 x 6 Cavities Per Mold: 54 Cavity Size: 19 x 19 x 10 mm (13/16 x 13/16 x 3/8”) Cavity volume: 2 mL (0.07 fl oz) Approximate Weight: 2.5 – 3 grams (0.09 - 0.011 oz)
-
Candy Mold Specifications: 5ml Dome Mold - 45 Cavities Reference: TM-DM-THC Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 9 x 6 Cavities Per Mold: 54 Cavity Size: 25 x 25 x 12 mm (1 x 1 x 1/2”) Cavity volume: 5 mL (0.17 fl oz) Approximate Weight: 6 – 7 grams (0.21 – 0.24 oz)
-
Main transporting unit for Automatic Depositor Includes:
- Main Unit
- White Pullies Set
- Green Rubber Cables Set
- Guides for Tray Pallets
-
Set of 14 white pullies for Automatic Depositor - 4 Large Pullies - 10 Small Pullies
-
Sliding bar for the Truffly Made Automatic Depositor 10 slots for pistons
-
Heating Block for the Truffly Made Automatic Depositor Large Power Cable sold separately Quick Connect cables sold separately
-
Set of 2 Quick Connect Cables for the Truffly Made Automatic Depositor’s heating panels Not Suitable For Universal Depositor
-
Set of 2 Insulated Panels for the Truffly Made Automatic Depositor. Includes:
- Insulated Element Front
- Insulated Element Back
-
Set of 2 Heating Panels for the Truffly Made Automatic Depositor. Includes:
- Heating Element Front
- Heating Element Back
-
Additional stainless steel Hopper for the Truffly Made Automatic Depositor 5.3 gallon / 20 liter capacity Includes: Lid, Valve Sleeves, Metallic Precision Balls Heating panels not included Not Suitable For Universal Depositor
-
7 inch Touchscreen Control Unit for the Automatic Depositor New Touchscreen Control Unit with Active LCD Touch Technology for control of the Automatic Depositor -Pre-programmed with all Truffly Made Molds - Option to program your own mold (additional cost may apply) - Pistons and Hopper temperature adjustement - Depositing volume adjustement - Pistons Prime mode - USB Port for mold import and software updates Only for Automatic Depositor -
Replacement Valve Stopper for automatic depositor, Universal Depositor, XL Depositor and Compact Depositor Valve Stopper located within the end of the piston. Also called “Valve Rubber” / “Silicone Valve Stopper” Pack of 10 Valve Stoppers -
4 Packs of 10 Replacement Valve Stopper for Automatic, Universal, XL and Compact Depositors Pistons. Valve Stopper located within the end of the piston. Also called “Valve Rubber” / “Silicone Valve Stopper” 4 Pack of 10 Valve Stoppers -
A Set of 10 additional Pistons for the Truffly Made Automatic Depositor, XL Depositor. Pistons includes o-rings and valve stopper. -
Pack of 10 replacement metal Valve Sleeve for Automatic, Universal, XL and Compact Depositor Hoppers Priced for pack of 10 Sleeves. -
Set of 10 replacement metallic precision balls for Hopper on the Automatic, Universal and XL Depositor Priced one set of 10 Precision balls. -
Additional or replacement white nylon Precision Balls for Hopper on the Automatic Universal Depositor Priced per pack of 10 nylon Precision balls. -
Replacement Power Cable for the Truffly Made Universal Depositor Control Unit. Fits the following: Universal Depositor Control Unit XL Depositor Control Unit Compact Depositor Control Unit Suitable for USA and Canada. -
Additional / replacement Pull Lever for the Universal Depositor and XL Universal Depositor NOT suitable for the Compact Universal -
The unique 3-oil blend of Vegalene® Premium Pan Spray has up to 30% more release agents than other pan coatings, assuring you can craft, cook and clean-up with ease. As a top branded foodservice pan coating Vegalene® Premium has no trans fat, sodium, gluten or calories and is Kosher Pareve. Vegalene® Premium allows you to accommodate nutritional and clean label concerns, creating healthier offerings without sacrificing the perfect release. 14 oz. aerosol spray can Due to US DOT shipping regulations, we are unable to ship this product to Alaska, Hawaii, Canada or any international destinations -
Cleaning Brush Set for Universal Piston Cleaning brushes for Pistons on the Universal Depositor, XL Depositor and Compact Depositor 2 pc set – includes brushes for cleaning pistons and nozzles -
Pack of 4 replacement Cables with cylinder for the Truffly Made Universal Depositor and XL Depositor. -
Replacement Piston Slider rail for the Universal Depositor and XL Universal Depositor NOT suitable for the Compact Universal -
60 mm Long Nozzle Ring for Pistons on the Universal Candy Depositor 4 mm diameter opening x 60 mm long nozzle -
Standard Nozzle Ring for Pistons on the Universal Candy Depositor 4 mm diameter opening x 40mm long nozzle -
Additional stainless steel Hopper for the Truffly Made Depositor and XL Depositor 1.6 gallon / 6 liter capacity Lid Cover is Included Heating panels not included Valve Sleeves not included Ball Bearings not included -
Increase your production capacity by 80% and improve efficiency with the new XL Hopper. The XL Hopper fits all Truffly Made Universal Depositors and XL Depositors, giving you an extra large 12 liter hopper capacity. 3.2 gallon / 12 liter capacity Lid Cover is Included Heating panels not included Valve Sleeves not included Ball Bearings not included -
4 packs of additional O-Rings 48 pack for Universal Depositor and XL Depositor piston/cylinder tube. 4 packs of O-Rings 48 O-Rings per pack O-Ring Size: 7 x 2.5 mm Item # 01.09.23 / 00.382953 -
Hydraulic Pump for Universal Depositor Also compatible for Universal Demolder Contenting the Operating level to the Piston Slide. -
Replacement Valve Stopper for Universal Depositor, XL Depositor and Compact Depositor Valve Stopper located within the end of the piston. Also called “Valve Rubber” / “Silicone Valve Stopper” Pack of 8 Valve Stoppers
-
4 Packs of 8 Replacement Valve Stopper for Universal, XL and Compact Depositors Pistons. Valve Stopper located within the end of the piston. Also called “Valve Rubber” / “Silicone Valve Stopper” 4 Pack of 8 Valve Stoppers -
Pack of 8 replacement metal Valve Sleeve for Universal, XL and Compact Depositor Hoppers Priced for pack of 8 Sleeves. -
Set of 8 replacement nylon precision balls for Hopper on the Universal Depositor Priced one set of 8 Precision balls.
-
Set of 8 replacement metallic precision balls for Hopper on the Universal Depositor Priced one set of 8 Precision balls.
-
A Pack of 2 Additional Pistons for Automatic Depositor Piston includes o-rings, valve stopper and standard nozzle
-
Front Heater Element Piston Unit for the Truffly Made Universal Depositor. Heating Panels and Hopper sold separately. -
Digital Control Unit for the Universal Depositor New compact Digital Control Unit with dual LED panels for independent adjustment of the hopper and nozzle temperature settings. Requires heating panels with coordinating multi-pin connectors. -
Heating Panels for the Truffly Made Universal Depositor and XL Universal Depositor. Includes:- Heating Element Front
- Heating Element Back
- Insulating Panel Left
- Insulating Panel Left
-
Pack of 10 additional stacking stainless steel trays with handle for the Automatic Depositor. -
Pack of 10 addition stacking metal trays with handle for the Universal and XL Depositors. ONLY FITS Universal and XL Depositors, not suitable for the Automatic Universal Depositor -
Set of two addition metal trays with handle for the Universal Depositor. ONLY FITS Universal and XL Depositors, not suitable for the Automatic Universal Depositor
-
Heating System Kit for the Universal & XL Depositor The Heating System Kit includes the Digital Control Unit with dual LED display, set of 2 Heating Panels, 2 Insulated Panels for Hopper and Block Heater for pistons. Suitable for 6L Hopper and XL Hopper -
Candy Mold Specifications: 5ml Macaron - 54 Cavities Reference: TM-MR-020 Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 9 x 6 Cavities Per Mold: 54 Cavity Size: 28 x 28 x 8 mm (1 1/8 x 1 1/8 x 5/32”) Cavity volume: 5 mL (0.17 fl oz) Approximate Weight: 5.5 – 6 grams (0.19 – 0.21 oz) -
Candy Mold Specifications: 6 ml Square Mold - 54 Cavities Reference: TM-SM-020 Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 9 x 6 Cavities Per Mold: 54 Cavity Size: 24 x 24 x 12 mm (15/16 x 15/16 x 1/2”) Cavity volume: 6 mL (0.20 fl oz) Approximate Weight: 7 – 8 grams (0.25 – 0.29 oz) -
Candy Mold Specifications: 16 ml Round Truffle - 63 Cavities Reference: TM-RT-020 Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 9 x 7 Cavities Per Mold: 63 Cavity Size: 28 x 28 x 25 mm (1 1/8 x 1 1/8 x 1”) Cavity volume: 16 mL (0.50 fl oz) Approximate Weight: 23 – 26 grams (0.81 – 0.91 oz) -
Candy Mold Specifications: 11ml Classic Cube - 54 Cavities Reference: TM-CC-020 Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 9 x 6 Cavities Per Mold: 54 Cavity Size: 25 x 25 x 19 mm (1 x 1 x 3/4”) Cavity volume: 11 mL (0.37 fl oz) Approximate Weight: 13 – 15 grams (0.45 – 0.53 oz)
-
Candy Mold Specifications: 3ml Ring Mold - 54 Cavities Reference: TM-RG-020 Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 9 x 6 Cavities Per Mold: 54 Cavity Size: 22 x 22 x 10 mm (7/8 x 7/8 x 3/8”) Cavity volume: 3 mL (0.10 fl oz) Approximate Weight: 3.5 – 4 grams (0.12 – 0.14 oz)
-
Candy Mold Specifications: 4ml Bacarat Mold - 54 Cavities Reference: TM-BT-020 Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 9 x 6 Cavities Per Mold: 54 Cavity Size: 20 x 20 x 12 mm (13/16 x 13/16 x 3/4”) Cavity volume: 4 mL (0.14 fl oz) Approximate Weight: 5 – 6 grams (0.14 – 0.21 oz)
-
Approved Universal Use
Candy Mold Specifications: 5ml Macaron CBD - 72 Cavities Reference: TM-MR-CBD Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 9 x 8 Cavities Per Mold: 72 Cavity Size: 28 x 28 x 8 mm (1 1/8 x 1 1/8 x 5/32”) Cavity volume: 5 mL (0.17 fl oz) Approximate Weight: 5.5 – 6 grams (0.19 – 0.21 oz) -
Approved Colorado State Symbol Approved Ohio State Symbol Approved Florida State Symbol Approved Universal Use
WITH IMPRINT LOGO Candy Mold Specifications: 4 ml Ball Mold - 80 Cavities State Regulated: Colorado, Ohio, Florida Reference: TM-BM-THC Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 10 x 8 Cavities Per Mold: 80 Cavity Size: 22 x 22 x 12.5 mm (14/16 x 14/16 x 1/2”) Cavity volume: 4 mL (0.14 fl oz) Approximate Weight: 4.5 – 5 grams (0.16 – 0.18 oz) -
Candy Mold Specifications: 2.25ml Mini Square - 54 Cavities State Regulated: Nevada Reference: TM-MS-THC Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 9 x 6 Cavities Per Mold: 54 Cavity Size: 25 x 15 x 6 mm (1 x 3/4 x 1/4”) Cavity volume: 2.25 mL (0.075 fl oz) Approximate Weight: 3 - 3.5 grams (0.10 - 0.12 oz)Approved Nevada State Symbol
Approved Universal Use -
Approved Massachusetts State Symbol Approved Maine State Symbol Approved Universal Use
Candy Mold Specifications: 2.8ml Mini Ball - 80 Cavities State Regulated: Massachusetts, Maine Reference: TM-MB-THC Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 8 x 10 Cavities Per Mold: 80 Cavity Size: 19 x 19 x 11 mm (10/16 x 10/16 x 7/16”) Cavity volume: 2.8 mL (0.09 fl oz) Approximate Weight: 3.2 – 3.7 grams (0.11 – 0.13 oz) -
Candy Mold Specifications: 3ml Mini Cube - 80 Cavities Reference: TM-MC-080 Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 10 x 8 Cavities Per Mold: 80 Cavity Size: 20 x 20 x 8 mm (13/16 x 13/16 x 5/16”) Cavity volume: 3 mL (0.10 fl oz) Approximate Weight: 3.5 - 4.5 grams (0.12 - 0.16 oz)
-
Candy Mold Specifications: 2.25ml Mini Square - 80 Cavities Reference: TM-MS-080 Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 10 x 8 Cavities Per Mold: 80 Cavity Size: 25 x 15 x 6 mm (1 x 3/4 x 1/4”) Cavity volume: 2.25 mL (0.075 fl oz) Approximate Weight: 3 - 3.5 grams (0.10 - 0.12 oz)
-
Candy Mold Specifications: 5ml Petit Cube - 80 Cavities Reference: TM-PC-080 Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 10 x 8 Cavities Per Mold: 80 Cavity Size: 25 x 19 x 11 mm (1 x 3/4 x 7/16”) Cavity volume: 5.5 mL (0.17 fl oz) Approximate Weight: 6 – 8 grams (0.21 – 0.28 oz)
-
Candy Mold Specifications: 15ml Rope Mold - 20 Cavities Reference: TM-RM-020 Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 10 x 2 Cavities Per Mold: 20 Cavity Size: 182 x 15 x 6.8 mm (7.15 x 0.59 x 0.26”) Cavity volume: 15 mL (0.51 fl oz)
-
Candy Mold Specifications: 3.5ml Mini Ball - 80 Cavities Reference: TM-MB8-080 Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 10 x 8 Cavities Per Mold: 80 Cavity Size: 21 x 21 x 11 mm (13/16 x 13/16 x 7/16”) Cavity volume: 3.5 mL (0.12 fl oz) Approximate Weight: 4 - 4.5 grams (0.14 - 0.16 oz)
-
Approved Massachusetts State Symbol Approved Maine State Symbol Approved Universal Use
Candy Mold Specifications: 1.85ml Mini Rounded Square THC - 80 Cavities State Regulated: Massachusetts, Maine Reference: TM-RS-THC80 Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 10 x 8 Cavities Per Mold: 80 Cavity Size: 15 x 15 x 8 mm (19/32 x 19/32 x 3/8”) Cavity volume: 1.85 mL (0.065 fl oz) Approximate Weight: 2 - 2.5 grams (0.07 - 0.09 oz) -
4 packs of the O-Ring Service kit for Universal, XL , Semi-auto and Automatic depositor pistons. Each Service Kit contains:- 16 pc – 00.382954 22 x 1.5
- 16 pc – 00.382955 15 x 1.5
- 16 pc – 00.382953 7 x 2.5
- 8 pc – 00.382956 9 x 1.5
-
. The Automatic Depositor comes with the 20 liters hopper with heated panels for chocolate, gummy, caramel and hard candy. 10 depositing pistons for maximum efficiency and productivity; Stainless steel construction with adjustable depositing nozzles that can be easily positioned to each mold layout. Touchscreen Unit Control that allow you to set the required temperature and volume before and during live production. This depositor is designed to work with all the Truffly Made silicone molds and most polycarbonate molds, it delivers accurately metered fillings with great flexibility and can deposit 10,000+ pieces per hour. This system is designed to work with all Truffly Made silicone molds, as well non-Truffly Made molds (Programming fee applies), it delivers accurately metered fillings with great flexibility and can deposit 10,000+ pieces per hour. REMELTING PRODUCT SUCH AS "Albanese Gummies®" IS NOT COMPATIBLE WITH THIS SYSTEM DUE TO VISCOSITY BEING TOO HIGH. For a Professional and Certified remelting process please refer to: - LorAnn Oils Gummy Mix - Melt To Make™ - Candy Pros Contact us for mold compatibility: Info@trufflymade.com
-
. The XL Universal Candy Depositor comes with the extra large hopper with heated panels for gummies and hard candies is designed to work with all the Truffly Made silicone molds and most polycarbonate molds up to 11.5 inches wide, it delivers accurately metered fillings with great flexibility. Stainless steel construction with eight adjustable depositing nozzles that can be easily positioned to each mold layout. Comes with 8 Pistons setup with Heavy Duty Nozzles
-
. The Universal Candy Depositor for gummies and hard candies is designed to work with all the Truffly Made silicone molds and most polycarbonate molds up to 11.5 inches wide, it delivers accurately metered fillings with great flexibility. Stainless steel construction with adjustable depositing nozzles that can be easily positioned to each mold layout. The Universal Candy Depositor comes with the hopper with heated panels. Comes with 8 Pistons setup with Heavy Duty Nozzles "We are loving our new machine! It produces almost 700 pieces of caramel in less than 30 minutes. That's a 2-3 hour savings. Thank you again for sending us the machine to try out. It's one of the best purchases I've made." Rob Taylor California Stafford chocolate In Stock
-
This Compact Universal Depositor comes with a digital control unit to regulate the temperature from 70F to 300F, 4 adjustable nozzles and a 3 liters / 3.15 quart hopper. It has been designed to work with most of the standard molds on the market, including silicone and polycarbonate products. Use your existing molds or simply adjust molds to fit. Maximum mold size that can fit is 6.5 x 15 inches. Ideal for Gelatin and Pectin gummy. Certified to work with LorAnn Oils Gummy Mix Certified to work with Melt To Make™ Certified to work with Candy Pros The Compact Universal Depositor delivers accurately metered fillings to the gram with great flexibility. Stainless steel construction with POM case. Four adjustable depositing nozzles, which can be easily positioned or removed to work with any mold layout.
-
Additional stacking Stainless Steel trays with handle for the Automatic Depositors. ONLY FITS Automatic Depositors, NOT SUITABLE FOR XL OR 6L DEPOSITOR. -
Approved New Mexico State Symbol Approved Universal Use
Candy Mold Specifications: 1.85ml Mini Rounded Dice THC - 80 Cavities State Regulated: New Mexico Reference: TM-NM-THC80 Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 10 x 8 Cavities Per Mold: 80 Cavity Size: 15 x 15 x 8 mm (19/32 x 19/32 x 3/8”) Cavity volume: 1.85 mL (0.065 fl oz) Approximate Weight: 2 - 2.5 grams (0.07 - 0.09 oz) -
Approved Nevada State Symbol Approved Universal Use
Candy Mold Specifications: 2.5ml Coin Mold - 54 Cavities State Regulated: Nevada Reference: TM-CM-THC Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 9 x 6 Cavities Per Mold: 54 Cavity Size: 20 x 20 x 8 mm (3/4 x 3/4 x 1/3”) Cavity volume: 2.5 mL (0.08 fl oz) Approximate Weight: 3 – 3.5 grams (0.10 - 0.12 oz) -
Approved Colorado State Symbol Approved Ohio State Symbol Approved Universal Use
Candy Mold Specifications: 5ml Macaron - 54 Cavities State Regulated: Colorado, Ohio, Florida Reference: TM-MR-THC Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 9 x 6 Cavities Per Mold: 54 Cavity Size: 28 x 28 x 8 mm (1 1/8 x 1 1/8 x 5/32”) Cavity volume: 5 mL (0.17 fl oz) Approximate Weight: 5.5 – 6 grams (0.19 – 0.21 oz) -
CONSULTING FEE IS ONE HOUR. If you require additional hours, these are will be at the same rate. We offer technical assistance and product development in all fields of sugar confectionery and chocolate products.
-
Making Improvements to your Recipe & Formulas- Recipe Development Specialists and Food Scientists will review your current recipe
- Advise on adjustments to fine tune your product
- Testing in the Lab to improve batch production and taste
- Update formulas to work in a high volume environment
- Work seamlessly with the Truffly Made Depositor
- Over 25 years experience in the candy industry
-
What's included:
- Recipe Development Specialists and Food Scientists develop recipes and formulas that fit your needs.
- 10 Hours On-site Consulting with our Recipe Development Specialist Included
- Ingredients and Small Wear equipment + Suppliers list
- Video tutorial "Step by Step"
- 10 Silicone Molds Included
- Gelatin or Pectin Gummy, Jellies, Caramel, Chocolate, Hard Candy, Edibles
- Include special ingredients, CBD, THC ...
- Wellness focused products, nutritional and flavor requirements
- Consideration for quality, shelf life stability, production goals and operation with Universal Depositor
- Over 25 years experience in the confectionery industry
- Testing provided by third-party - Great Plains Analytical Laboratory
-
Candy Mold Specifications: 1.85ml Mini Rounded Square - 80 Cavities Reference: TM-RS-080 Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 10 x 8 Cavities Per Mold: 80 Cavity Size: 15 x 15 x 8 mm (19/32 x 19/32 x 3/8”) Cavity volume: 1.85 mL (0.065 fl oz) Approximate Weight: 2 - 2.5 grams (0.07 - 0.09 oz)
-
Approved Massachusetts State Symbol Approved Maine State Symbol Approved Universal Use
Candy Mold Specifications: 5ml Macaron - 80 Cavities State Regulated: Massachusetts, Maine Reference: TM-MR-THC80 Mold Size : 292 x 381 mm (11.5” x 15”) Mold Layout: 10 x 8 Cavities Per Mold: 80 Cavity Size: 28 x 28 x 8 mm (1 1/8 x 1 1/8 x 5/32”) Cavity volume: 5 mL (0.17 fl oz) Approximate Weight: 5.5 – 6 grams (0.19 – 0.21 oz)
