-
Approved New Jersey State Symbol Approved Universal Use
WITH IMPRINT LOGO Candy Mold Specifications: 4.5ml Rounded Square MoldĀ - 80 Cavities State Regulated: New Jersey Reference: TM-RSE-THC Mold Size : 292 x 381 mm (11.5ā x 15ā) Mold Layout: 10 x 8 Cavities Per Mold: 80 Cavity Size:Ā 20Ā xĀ 20 x 12 mm Ā (13/16 x 13/16 x 3/4ā) Cavity volume: 4.5 mL Ā (0.15 fl oz) Approximate Weight: 5.5 ā 6.5 grams (0.15 ā 0.23 oz) -
PRE-ORDER NOW! The Automatic Candy Demolder is designed to remove a full sheet of candies from molds in one āpopā. Unmold your trays in second! Ideal for Hard Candies, Gummies, Caramels, Chocolate and Fruit Jelly! The automatic mold āPopperā includes one standard mold frame to match the mold you are using. Please note that the mold is not included.Ā Custom mold plates are available for additional 1,699 USD to work with your silicone molds. Unmolding Rate: 15,000+ pieces per hour Adjustable Speed Dimensions:Ā 27.16ā W x 38.58ā L x 27.56ā HThe Automatic Candy Demolder is compatible with most Truffly Made molds and Non-Truffly Made molds as long as the cavities can be popped inside-out completely and minimum 8mm spacing between each cavities.
Maximum cavities per mold = 80
Maximum Mold size = 11.5 x 15ā
Please contact info@trufflymade.com for a custom quote LARGE PIN FITTINGS AVAILABLE HERE ā Please select the mold you are using from our collection before placing an order. If non-Truffly Made mold, please contact us -
Hex Key Set to fit screws on the Universal and Automatic Depositors. Remove and replace screws when servicing the Universal and Automatic Depositor. Set of 7 Hex Keys
-
Replacement Screws for Automaic Depositor ONLY Replacement screws for attaching the Automatic Depositor transporter unit to body. 2x front, 2x side and 4x rear. Pack of 8 screws
-
Approved Colorado State Symbol Approved Ohio State Symbol Approved Florida State Symbol Approved Universal Use
Candy Mold Specifications: Reference: TM-HX-THC Mold Size : 292 x 381 mm (11.5ā x 15ā) Mold Layout: 8 x 10 Cavities Per Mold: 80 Cavity Size:Ā 23 x 25 x 10 mm (0.90 x 0.98 x 0.39ā) Cavity volume:Ā 5.5 mL Ā (0.19 fl oz) Approximate Weight: 6.0 ā 7.0 grams (0.20 ā 0.24 oz) -
Candy Mold Specifications: Reference: TM-DD-080 Mold Size : 292 x 381 mm (11.5ā x 15ā) Mold Layout: 8 x 10 Cavities Per Mold: 80 Cavity Size:Ā Ā 13 x 20 x 8 mm (0.51" x 0.78" x 0.31") Cavity volume:Ā 2.0 mL Ā (0.07 fl oz) Approximate Weight: 2.5 - 3 grams (0.08 - 0.11 oz)
-
Candy Mold Specifications: 4ml Rounded Square Mold - 80 Cavities Reference: TM-RSE-080 Mold Size : 292 x 381 mm (11.5ā x 15ā) Mold Layout: 10 x 8 Cavities Per Mold: 80 Cavity Size:Ā 20Ā xĀ 20 x 12 mm Ā (13/16 x 13/16 x 3/4ā) Cavity volume: 4.5 mL Ā (0.15 fl oz) Approximate Weight: 5.5 ā 6.5 grams (0.15 ā 0.23 oz)
-
IN STOCK - READY TO SHIPĀ ā BUNDLE DEAL INCLUDES 30 MOLDS OF YOUR CHOICE Ideal for novice and experienced operators! Truffly Made XL Universal Candy Depositor For Gummies, Caramel, Hard Candy. TheĀ Truffly Made, XL Candy Depositor For Gummies, Caramel, Hard Candy is designed to remove the burden of filling multiple cavity candy molds while increasing the accuracy and uniformity of filling each mold. It works with both low heat confectionery mixtures such as chocolate and ganache, as well as high heat recipes such as gummies, taffy, caramel and hard candy. Filling Capacity: 5,000+ hourly For More Information: info@trufflymade.comPlease Select Your Molds Below Before Adding to Cart
ā¬ā¬ā¬
-
Set of two additional white melamine trays for the Universal Depositor. ONLY FITS Universal, XL and Push & Go Depositors.
-
Replacement Screws for Universal Depositor, XL Depositor, Semi-Automatic Side Panels Screws located on both side of the depositor to hold the panels. 2 screws on each side. Pack of 8 screws
-
Replacement Rubber Feet for Universal Depositor, XL Depositor, Semi-Automatic and Compact Depositor Also compatible for Control Unit Rubber Feet located on the bottom (6) and back (4) of the depositor. Pack of 10 Rubber Feet How to apply:
- Remove old rubber feet
- Clean surface area with isopropyl alcohol
- Apply new rubber feet by peeling the back of the 3M double sided tape
-
A Set of 8 additional Pistons for the Truffly Made Universal Depositor, XL Depositor or Semi-Automatic Depositor. Included: Heavy Duty Nozzles Pistons includes o-rings and valve stopper.
-
A Pack of 2 Additional Pistons for Universal & Semi-Automatic Depositor Including Heavy Duty Nozzles Piston includes o-rings, valve stopper and standard nozzle
-
Whatās included:
- Industry Standard recipes and formulas that fit your needs.
- Recipes Developed to be used with all Truffly Made Universal Depositors.
- Gelatin or Pectin Gummy Recipe, Candy Recipe, Caramel, Chocolate Recipe, Hard Candy, Edible Recipe
- Include special ingredients, CBD, THC ā¦
- Wellness focused products, nutritional and flavor requirements
- Consideration for quality, shelf life stability, water activity, production goals and operation with Universal Depositors
- Over 25 years experience in the confectionery industry
-
Candy Mold Specifications: Reference: TM-NX-080 Mold Size : 292 x 381 mm (11.5ā x 15ā) Mold Layout: 8 x 10 Cavities Per Mold: 80 Cavity Size:Ā Ā 21 x 16 x 15 mm (0.82 x 0.63 x 0.59") Cavity volume:Ā 4 mL Ā (0.13 fl oz) Approximate Weight: 4.5 - 5.0 grams (0.14 - 0.18 oz)
-
Approved Colorado State Symbol Approved Ohio State Symbol Approved Florida State Symbol Approved Universal Use
Candy Mold Specifications: 3.5ml Mini Cube - 80 Cavities Candy Mold State Regulated: Colorado, Ohio, Florida Reference: TM-MC-THC Mold Size : 292 x 381 mm (11.5ā x 15ā) Mold Layout: 10 x 8 Cavities Per Mold: 80 Cavity Size: 20 x 20 x 9 mm Ā (0.78 x 0.78 x 0.35ā) Cavity volume: 3.5 mL Ā (0.12 fl oz) Approximate Weight: 4.0 ā 4.5 grams (0.14 ā 0.16 oz) -
Candy Mold Specifications: Reference: TM-SH-080 Mold Size : 292 x 381 mm (11.5ā x 15ā) Mold Layout: 8 x 10 Cavities Per Mold: 80 Cavity Size:Ā Ā 28.5 x 29 x 12mm (1.12 x 1.15 x 0.47") Cavity volume:Ā 3 mL Ā (0.11 fl oz) Approximate Weight: 3.5 - 4.5 grams (0.12 - 0.16 oz)
-
ApprovedĀ Massachusetts State Symbol ApprovedĀ Maine State Symbol Approved Universal Use
Candy Mold Specifications: 3ml Mini Cube - 80 Cavities Candy Mold Separation Line State Regulated: Massachusetts, Maine Reference: TM-MC-THC80 Mold Size : 292 x 381 mm (11.5ā x 15ā) Mold Layout: 10 x 8 Cavities Per Mold: 80 Cavity Size: 20Ā xĀ 20 x 8 mm Ā (13/16 x 13/16 x 5/16ā) Cavity volume: 3 mL Ā (0.10 fl oz) Approximate Weight: 3.5 ā 4 grams (0.12 ā 0.14 oz) -
Universal Candy Demolder is designed to remove a full sheet of candies from molds in one āpopā. Demold your trays in second! Ideal for Hard Candies, Gummies, Caramels, Chocolate and Fruit Jelly! The mold āPopperā includes one standard mold frame to match the mold you are using. Please note that the mold is not included.Ā Custom mold plates are available for additional 911 USD to work with your silicone molds. Dimensions:Ā 19.75ā w x 19.25ā L x 8.25ā H
The Universal Demolder is compatible with most Truffly Made molds and Non-Truffly Made molds as long as the cavities can be popped inside-out completely and minimum 8mm spacing between each cavities.
Maximum cavities per mold = 80
Maximum Mold size = 11.5 x 15ā
Please contact info@trufflymade.com for a custom quote LARGE PIN FITTINGS AVAILABLE HERE ā Please select the type of mold you are using: -
Candy Mold Specifications: 4ml Triangle Mold - 80 Cavities Reference: TM-TG-THC Mold Size : 292 x 381 mm (11.5ā x 15ā) Mold Layout: 8 x 10 Cavities Per Mold: 80 Cavity Size:Ā 25 x 29 x 10 mm (1 x 1.14 x 0.39ā) Cavity volume: 4 mL Ā (0.13 fl oz) Approximate Weight: 4.5 ā 5.5 grams (0.15 ā 0.19 oz)
ApprovedĀ New York State Symbol
Approved Universal Use -
Candy Mold Specifications: Reference: TM-BN-080 Mold Size : 292 x 381 mm (11.5ā x 15ā) Mold Layout: 8 x 10 Cavities Per Mold: 80 Cavity Size:Ā Ā 21.5mm Ć x 9.5mm (0.85 Ć x 0.37") Cavity volume:Ā 2.5 mL Ā (0.085 fl oz) Approximate Weight: 3.0 - 3.5 grams (0.10 - 0.12 oz)
-
Whatās included:- Full recipe and detailed procedure, PDF Format
- Ingredients and small wear equipment list + suppliers info, PDF Format
- Video tutorial āstep by stepā with detailed verbal explanations
- 1h consultation via phone or video call with our Recipe development specialist
- 10 Silicone Molds Included
- Additional information regarding infusion method.
- Turn-key operation with Universal Depositor
-
Whatās included:
- Full recipe and detailed procedure, PDF Format
- Ingredients and small wear equipment list + suppliers info, PDF Format
- Video tutorial with detailed verbal explanations
- 1h consultation via phone or video call with our Chef, confectioner
- 10 Silicone Molds Included
- Additional information regarding infusion method.
- Turn-key operation with Universal Depositor
-
Candy Mold Specifications: Reference: TM-JB-080 Mold Size : 292 x 381 mm (11.5ā x 15ā) Mold Layout: 8 x 10 Cavities Per Mold: 80 Cavity Size:Ā Ā 23 x 14 x 16 mm (0.90 x 0.55 x 0.63") Cavity volume:Ā 3.0 mL Ā (0.10 fl oz) Approximate Weight: 3.5 - 4.0 grams (0.14 - 0.16 oz)
-
Heavy Duty Nozzle Ring for Piston - Universal Depositor 6 mm diameter opening x 60 mm long Recommended to use with high viscosity products such as Caramel, Taffy, Hard Candy and Pectin Gummy Large chamber diameter 6mm allow products with higher viscosity to be dispensed while applying less pressure within the piston assembly. Facilitate the operation with high temperature products; the Heavy Duty Nozzle Ring for Piston is made out of high grade stainless steel that retain maximum heat and prevent product to seize or solidify within the chamber during production. Suitable for Truffly Made Universal Depositors. NOT SUITABLE FOR AUTOMATIC DEPOSITOR
-
Reference: TM-RD-080 Mold Size : 292 x 381 mm (11.5ā x 15ā) Mold Layout: 8 x 10 Cavities Per Mold: 80 Cavity Size:Ā 27 dia x 22 mm (1.06 dia x 0.86ā) Cavity volume: Ā 11 mL Ā (0.37 fl oz) Approximate Weight: 13 - 15 grams Ā (0.45 - 0.53 oz)
-
In this collection of Depositor Maintenance videos we are teaching you how to properly maintain your Universal Depositor 6L and XL.All new spare parts can be purchased HEREĀ āĀEach video explains in detail how to replace several components of the depositor such as:.-Ā Rotating DiscsĀ Replacement- Front Bar Level-Ā Cables for Control UnitĀ Replacement-Ā Hydraulic PumpĀ ReplacementEach topic explicitly shows and demonstrate how to operate and list the appropriate tools to be used.
-
The pin fittings can be added on the original pins of the Universal Candy Demolder to increase the diameter and improve efficiency of unmolding with larger cavity size molds such as Macaron 80, Petit Cube 80, Mini Square 80, or custom molds. Food contact safe and easy to clean using dish soap and hot water. Pins fittings are easy to add on and can be removed for cleaning purposes. Pack of 80 Pin Fittings
-
Candy Mold Specifications: Reference: TM-DC-080 Mold Size : 292 x 381 mm (11.5ā x 15ā) Mold Layout: 8 x 10 Cavities Per Mold: 80 Cavity Size:Ā Ā 15 x 15 x 15 mm (19/32 x 10/32 x 19/32") Cavity volume:Ā 3.5 mL Ā (0.12 fl oz) Approximate Weight: 4 - 4.5 grams (0.14 - 0.16 oz)
-
. IN STOCK - READY TO SHIPĀ Ideal for novice and experienced operators! The 8 Pistons Semi-Automatic Candy Depositor for chocolate, gummies, taffy, caramel and hard candy is designed to work with all the Truffly Made silicone molds and most polycarbonate molds up to 11.5 inches wide, it delivers accurately metered fillings with great flexibility. Stainless steel construction with adjustable depositing nozzles that can be easily positioned to each mold layout. The Semi-automatic Depositor comes with a complete heating system with temperatures ranging from 68F to 320F. Filling Capacity: 5,000 - 8,000+ hourly For More Information: info@trufflymade.com
-
1000 Lollipop Sticks - 10 bags of 100 each Size: 100mm x 3.5mm (3.94" x 0.14") Material: High quality wood fiber pulp, safe, 100% natural and recyclable; certified for use with food High-quality food-grade paper sticks, environmentally friendly and tasteless, safe and hygienic, wonāt rub off or fall apart. PRODUCTION METHOD: Set lollipop sticks into the dedicated slots on the Truffly Made Lollipop 24 mold; pour the hard candy into the mold directly from the pot, using a funnel or the Universal Depositor, wait for the candy to cool, then take it out!
-
100 LOLLIPOP STICKS INCLUDED PER MOLD Additional Sticks available HEREĀ ā Candy Mold Specifications: Reference: TM-LP-024 Mold Size : 292 x 381 mm (11.5ā x 15ā) Mold Layout: 4 x 6 Cavities Per Mold: 24 Cavity Size:Ā 33 round x 10 mm (1.30" x 0.40") Cavity volume:Ā 8 mL Ā (0.27 fl oz) Approximate Weight: 11-12 grams (0.39-0.43 oz)
-
Replacement Large Discs for the Universal Depositor and XL Universal Depositor Set of 2 discs for right and left side Comes with graduation measure tape. NOT suitable for the Compact Universal
-
.
ON-SITE CONSULTING FEE IS PER DAY
2 Days minimum RequiredOur consultant will come to your facility to help you, train your team and give your precious advice for the development of your products, standard operation procedures and more.
Travel and lodging are included in price. Does not include price of the recipe.
Recipe development or adjustment must be purchased prior booking On-Site consulting -
Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā Ā
Ā Ā Ā Ā 10MG
NEW Approved Nevada State Symbol Approved Universal Use
Candy Mold Specifications: 2.25ml Mini Square - 80 Cavities State Regulated: Nevada Reference: TM-MS80-THC Mold Size : 292 x 381 mm (11.5ā x 15ā) Mold Layout: 10 x 8 Cavities Per Mold: 80 Cavity Size:Ā 25 x 15 x 6 mm Ā (1 x 3/4 x 1/4ā) Cavity volume: 2.25 mL Ā (0.075 fl oz) Approximate Weight: 3 - 3.5 grams (0.10 - 0.12 oz) -
TheĀ Truffly Made Silicone Mat is designed to be placed under the tray of the Automatic Depositor by the nozzles to allow easy cleaning and care of the transporting unit base Reference: TM-MC-AM Mold Size : 216 x 340 mm (8.5ā x 13ā) Mold Layout: N/A Cavities Per Mold: N/A Cavity Size:Ā N/A Cavity volume: N/A
-
Appropriate and recommended to lubricate Pistons and O-rings
- NSF H1 Registered
- Colorless & Non Staining
- Eliminates Binding & Sticking
- Waterproofs & Cleans
- Protects and Lubricates Metal to Metal, Plastic to Plastic and Plastic to Metal
- Does not leave sticky residue overtimeĀ
-
Candy Mold Specifications: Reference: TM-PK-012 Mold Size : 292 x 381 mm (11.5ā x 15ā) Mold Layout: 8 x 10 Cavities Per Mold: 80 Cavity Size:Ā 21 dia x 10 mm (13/16 x 3/8ā) Cavity volume:Ā 3.5 mL Ā (0.12 fl oz) Approximate Weight: 4 ā 4.5 grams (0.14 ā 0.16 oz)
-
Candy Mold Specifications: Reference: TM-HX-012 Mold Size : 292 x 381 mm (11.5ā x 15ā) Mold Layout: 8 x 10 Cavities Per Mold: 80 Cavity Size:Ā 23 x 25 x 10 mm (0.90 x 0.98 x 0.39ā) Cavity volume:Ā 5.5 mL Ā (0.19 fl oz) Approximate Weight: 6.0 ā 7.0 grams (0.20 ā 0.24 oz)
-
Set of 3 Cables for the Truffly Made Universal and XL Depositorās heating panels Connecting heating panels and heater block to Control Unit Not Suitable For Automatic Depositor -
TheĀ Truffly Made Silicone Mold MatĀ is designed to cover all the Truffly Made molds and protect the filling from moisture and humidity. Reference: TM-MC-001 Mold Size : 292 x 381 mm (11.5ā x 15ā) Mold Layout: N/A Cavities Per Mold: N/A Cavity Size:Ā N/A Cavity volume: N/A
-
Candy Mold Specifications: Reference: TM-OV-012 Mold Size : 292 x 381 mm (11.5ā x 15ā) Mold Layout: 9 x 6 Cavities Per Mold: 54 Cavity Size:Ā 27 x 17 x 15 mm (1- 1/16 x 11/16 x 9/16ā) Cavity volume: 12 mL Ā (0.04 fl oz)
-
Candy Mold Specifications: Reference: TM-MP-008 Mold Size : 292 x 381 mm (11.5ā x 15ā) Mold Layout: 9 x 6 Cavities Per Mold: 54 Cavity Size:Ā 19 xĀ 19 x 10 mm (13/16 xĀ 13/16 x 3/8ā) Cavity volume: 2 mL Ā (0.07 fl oz) Approximate Weight: 2.5 ā 3 grams (0.09 - 0.011 oz)
-
Candy Mold Specifications: 5ml Dome Mold - 45 Cavities Reference: TM-DM-THC Mold Size : 292 x 381 mm (11.5ā x 15ā) Mold Layout: 9 x 6 Cavities Per Mold: 54 Cavity Size:Ā 25 x 25 x 12 mm (1 x 1 x 1/2ā) Cavity volume: 5 mL Ā (0.17 fl oz) Approximate Weight: 6 ā 7 grams (0.21 ā 0.24 oz)
-
Main transporting unit for Automatic Depositor Includes:
- Main Unit
- White Pullies Set
- Green Rubber Cables Set
- Guides for Tray Pallets
-
Set of 14 white pullies for Automatic Depositor - 4 Large Pullies - 10 Small Pullies
-
Sliding bar for the Truffly Made Automatic Depositor 10 slots for pistons
-
Heating Block for the Truffly Made Automatic Depositor Large Power Cable sold separately Quick Connect cables sold separately
-
Set of 2 Quick Connect Cables for the Truffly Made Automatic Depositorās heating panels Not Suitable For Universal Depositor
-
Set of 2 Insulated Panels for the Truffly Made Automatic Depositor. Includes:
- Insulated Element Front
- Insulated Element Back
-
Set of 2 Heating Panels for the Truffly Made Automatic Depositor. Includes:
- Heating Element Front
- Heating Element Back
-
Additional stainless steel Hopper for the Truffly Made Automatic Depositor 5.3 gallon / 20 liter capacity Includes: Lid, Valve Sleeves, Metallic Precision Balls Heating panels not included Not Suitable For Universal Depositor
-
7 inch Touchscreen Control Unit for the Automatic Depositor New Touchscreen Control Unit with Active LCD Touch Technology for control of the Automatic Depositor -Pre-programmed with all Truffly Made Molds - Option to program your own mold (additional cost may apply) - Pistons and Hopper temperature adjustement - Depositing volume adjustement - Pistons Prime mode - USB Port for mold import and software updates Only for Automatic Depositor -
Replacement Valve Stopper for automatic depositor, Universal Depositor, XL Depositor and Compact Depositor Valve Stopper located within the end of the piston. Also called āValve Rubberā / āSilicone Valve Stopperā Pack of 10 Valve Stoppers -
4 Packs of 10 Replacement Valve Stopper for Automatic, Universal, XL and Compact Depositors Pistons. Valve Stopper located within the end of the piston. Also called āValve Rubberā / āSilicone Valve Stopperā 4 Pack of 10 Valve Stoppers -
A Set of 10 additional Pistons for the Truffly Made Automatic Depositor, XL Depositor. Pistons includes o-rings and valve stopper. -
Pack of 10 replacement metal Valve Sleeve for Automatic, Universal, XL and Compact Depositor Hoppers Priced for pack of 10 Sleeves. -
Set of 10 replacement metallic precision balls for Hopper on the Automatic, Universal and XL Depositor Priced one set of 10 Precision balls. -
Additional or replacement white nylon Precision Balls for Hopper on the Automatic Universal Depositor Priced per pack of 10 nylon Precision balls. -
Replacement Power Cable for the Truffly Made Universal Depositor Control Unit. Fits the following: Universal Depositor Control Unit XL Depositor Control Unit Compact DepositorĀ Control Unit Suitable for USA and Canada. -
Additional / replacement Pull Lever for the Universal Depositor and XL Universal Depositor NOT suitable for the Compact Universal -
The unique 3-oil blend of VegaleneĀ®Ā Premium Pan Spray has up to 30% more release agents than other pan coatings, assuring you can craft, cook and clean-up with ease. As a top branded foodservice pan coating VegaleneĀ®Ā Premium has no trans fat, sodium, gluten or calories and is Kosher Pareve. VegaleneĀ®Ā Premium allows you to accommodate nutritional and clean label concerns, creating healthier offerings without sacrificing the perfect release. 14 oz. aerosol spray can Due to US DOT shipping regulations, we are unable to ship this product to Alaska, Hawaii, Canada or any international destinations -
Cleaning Brush SetĀ for UniversalĀ Piston Cleaning brushes for PistonsĀ on the Universal Depositor, XL Depositor and Compact Depositor 2 pc set ā includes brushes for cleaning pistons and nozzles -
Pack of 4 replacement Cables with cylinder for the Truffly Made Universal Depositor and XL Depositor. -
Replacement Piston Slider rail for the Universal Depositor and XL Universal Depositor NOT suitable for the Compact Universal -
60 mm Long Nozzle Ring for Pistons on the Universal Candy Depositor 4 mm diameter opening x 60 mm long nozzle -
Standard Nozzle Ring for Pistons on the Universal Candy Depositor 4 mm diameter opening xĀ 40mm long nozzle -
Additional stainless steel Hopper for the Truffly Made Depositor and XL Depositor 1.3 gallon / 5 liter capacity Lid Cover is Included Heating panels not included Valve SleevesĀ not included Ball Bearings not included -
Increase your production capacity by 80% and improve efficiency with the new XL Hopper. The XL Hopper fits all Truffly Made Universal Depositors and XL Depositors, giving you an extra large 12 liter hopper capacity. 3.2Ā gallon /Ā 12 liter capacity Lid Cover is Included Heating panels not included Valve SleevesĀ not included Ball Bearings not included -
4 packsĀ ofĀ additional O-RingsĀ 48 packĀ for Universal DepositorĀ and XL Depositor piston/cylinder tube. 4 packs of O-Rings 48 O-Rings per pack O-Ring Size:Ā 7 x 2.5 mm Item #Ā Ā 01.09.23 /Ā 00.382953 -
Hydraulic Pump for Universal Depositor Also compatible for Universal Demolder Contenting the Operating level to the Piston Slide. -
Replacement Valve Stopper for Universal Depositor, XL Depositor and Compact Depositor Valve Stopper located within the end of the piston. Also called āValve Rubberā / āSilicone Valve Stopperā Pack of 8 Valve Stoppers
-
4 Packs of 8 Replacement Valve Stopper for Universal, XL and Compact Depositors Pistons. Valve Stopper located within the end of the piston. Also called āValve Rubberā / āSilicone Valve Stopperā 4 Pack of 8 Valve Stoppers -
Pack of 8 replacement metal Valve Sleeve for Universal, XL and Compact Depositor Hoppers Priced for pack of 8 Sleeves. -
Set of 8 replacement nylon precision balls for Hopper on the Universal Depositor Priced one set of 8 Precision balls.
-
Set of 8 replacement metallic precision balls for Hopper on the Universal Depositor Priced one set of 8 Precision balls.
-
A Pack of 2 Additional Pistons for Automatic Depositor Piston includes o-rings, valve stopper and standard nozzle
-
Front HeaterĀ Element Piston UnitĀ for the Truffly Made Universal Depositor. HeatingĀ PanelsĀ andĀ Hopper sold separately. -
Digital Control Unit for the Universal Depositor New compact Digital Control Unit with dual LED panels for independent adjustment of the hopper and nozzle temperature settings. Requires heating panels with coordinating multi-pin connectors. -
Heating Panels for the Truffly Made Universal Depositor. Includes:- Heating Element Front
- Heating Element Back
- Insulating Panel Left
- Insulating Panel Left
-
Pack of 10 additional stacking stainless steel trays with handle for theĀ Automatic Depositor. -
Pack of 10 addition stacking metal trays with handle for the Universal and XL Depositors. ONLY FITSĀ Universal and XL Depositors, not suitable for theĀ Automatic Universal Depositor -
Set of two addition metal trays with handle for the Universal Depositor. ONLY FITSĀ Universal and XL Depositors, not suitable for theĀ Automatic Universal Depositor
-
Heating System Kit for the Universal & XL Depositor The Heating System Kit includes the Digital Control Unit with dual LED display,Ā set of 2 Heating Panels, 2 Insulated Panels for Hopper and Block Heater for pistons. Suitable for 6L Hopper and XL Hopper -
Candy Mold Specifications: 5ml Diamond Mold - 45 Cavities Reference: TM-DM-020 Mold Size : 292 x 381 mm (11.5ā x 15ā) Mold Layout: 9 x 5 Cavities Per Mold: 45 Cavity Size:Ā 40Ā xĀ 25 x 12 mm Ā (1 9/16 x 1 x 1/2ā) Cavity volume: 5 mL Ā (0.17 fl oz) Approximate Weight: 6 ā 7 grams (0.21 ā 0.25 oz) -
Candy Mold Specifications: 5ml Macaron - 54 Cavities Reference: TM-MR-020 Mold Size : 292 x 381 mm (11.5ā x 15ā) Mold Layout: 9 x 6 Cavities Per Mold: 54 Cavity Size:Ā 28Ā xĀ 28 x 8 mm Ā (1 1/8 x 1 1/8 x 5/32ā) Cavity volume: 5 mL Ā (0.17 fl oz) Approximate Weight: 5.5 ā 6 grams (0.19 ā 0.21 oz) -
Candy Mold Specifications: 6 ml Square Mold - 54 Cavities Reference: TM-SM-020 Mold Size : 292 x 381 mm (11.5ā x 15ā) Mold Layout: 9 x 6 Cavities Per Mold: 54 Cavity Size:Ā 24Ā xĀ 24 x 12 mm Ā (15/16 x 15/16 x 1/2ā) Cavity volume: 6 mL Ā (0.20 fl oz) Approximate Weight: 7 ā 8 grams (0.25 ā 0.29 oz) -
Candy Mold Specifications: 16 ml Round Truffle - 63 Cavities Reference: TM-RT-020 Mold Size : 292 x 381 mm (11.5ā x 15ā) Mold Layout: 9 x 7 Cavities Per Mold: 63 Cavity Size:Ā 28Ā xĀ 28 x 25 mm Ā (1 1/8 x 1 1/8 x 1ā) Cavity volume: 16 mL Ā (0.50 fl oz) Approximate Weight: 23 ā 26 grams (0.81 ā 0.91 oz) -
Candy Mold Specifications: 11ml Classic Cube - 54 Cavities Reference: TM-CC-020 Mold Size : 292 x 381 mm (11.5ā x 15ā) Mold Layout: 9 x 6 Cavities Per Mold: 54 Cavity Size:Ā 25Ā xĀ 25 x 19 mm Ā (1 x 1 x 3/4ā) Cavity volume: 11 mL Ā (0.37 fl oz) Approximate Weight: 13 ā 15 grams (0.45 ā 0.53 oz)
-
Candy Mold Specifications: 3ml Ring Mold - 54 Cavities Reference: TM-RG-020 Mold Size : 292 x 381 mm (11.5ā x 15ā) Mold Layout: 9 x 6 Cavities Per Mold: 54 Cavity Size:Ā 22Ā xĀ 22 x 10 mm Ā (7/8 x 7/8 x 3/8ā) Cavity volume: 3 mL Ā (0.10 fl oz) Approximate Weight: 3.5 ā 4 grams (0.12 ā 0.14 oz)
-
Candy Mold Specifications: 4ml Bacarat Mold - 54 Cavities Reference: TM-BT-020 Mold Size : 292 x 381 mm (11.5ā x 15ā) Mold Layout: 9 x 6 Cavities Per Mold: 54 Cavity Size:Ā 20Ā xĀ 20 x 12 mm Ā (13/16 x 13/16 x 3/4ā) Cavity volume: 4 mL Ā (0.14 fl oz) Approximate Weight: 5 ā 6 grams (0.14 ā 0.21 oz)
-
Approved Universal Use
Candy Mold Specifications: 5ml Macaron CBD - 72 Cavities Reference: TM-MR-CBD Mold Size : 292 x 381 mm (11.5ā x 15ā) Mold Layout: 9 x 8 Cavities Per Mold: 72 Cavity Size:Ā 28Ā xĀ 28 x 8 mm Ā (1 1/8 x 1 1/8 x 5/32ā) Cavity volume: 5 mL Ā (0.17 fl oz) Approximate Weight: 5.5 ā 6 grams (0.19 ā 0.21 oz) -
Approved Colorado State Symbol Approved Ohio State Symbol Approved Florida State Symbol Approved Universal Use
WITH IMPRINT LOGO Candy Mold Specifications: 4 ml Ball Mold - 80 Cavities State Regulated: Colorado, Ohio, Florida Reference: TM-BM-THC Mold Size : 292 x 381 mm (11.5ā x 15ā) Mold Layout: 10 x 8 Cavities Per Mold: 80 Cavity Size:Ā 22Ā xĀ 22 x 12.5 mm Ā (14/16 x 14/16 x 1/2ā) Cavity volume: 4 mL Ā (0.14 fl oz) Approximate Weight: 4.5 ā 5 grams (0.16 ā 0.18 oz) -
Candy Mold Specifications: 2.25ml Mini Square - 54 Cavities State Regulated: Nevada Reference: TM-MS-THC Mold Size : 292 x 381 mm (11.5ā x 15ā) Mold Layout: 9 x 6 Cavities Per Mold: 54 Cavity Size:Ā 25 x 15 x 6 mm Ā (1 x 3/4 x 1/4ā) Cavity volume: 2.25 mL Ā (0.075 fl oz) Approximate Weight: 3 - 3.5 grams (0.10 - 0.12 oz)ApprovedĀ Nevada State Symbol
Approved Universal Use -
ApprovedĀ Massachusetts State Symbol ApprovedĀ Maine State Symbol Approved Universal Use
Candy Mold Specifications: 2.8ml Mini Ball - 80 Cavities State Regulated: Massachusetts, Maine Reference: TM-MB-THC Mold Size : 292 x 381 mm (11.5ā x 15ā) Mold Layout: 8 x 10 Cavities Per Mold: 80 Cavity Size:Ā 19 x 19 x 11 mmĀ Ā (10/16 x 10/16 x 7/16ā) Cavity volume: 2.8 mL Ā (0.09 fl oz) Approximate Weight: 3.2 ā 3.7 grams (0.11 ā 0.13 oz) -
Candy Mold Specifications: 3ml Mini Cube - 80 Cavities Reference: TM-MC-080 Mold Size : 292 x 381 mm (11.5ā x 15ā) Mold Layout: 10 x 8 Cavities Per Mold: 80 Cavity Size:Ā 20Ā xĀ 20 x 8 mm Ā (13/16 x 13/16 x 5/16ā) Cavity volume: 3 mL Ā (0.10 fl oz) Approximate Weight: 3.5 - 4.5 grams (0.12 - 0.16 oz)
-
Candy Mold Specifications: 2.25ml Mini Square - 80 Cavities Reference: TM-MS-080 Mold Size : 292 x 381 mm (11.5ā x 15ā) Mold Layout: 10 x 8 Cavities Per Mold: 80 Cavity Size:Ā 25 x 15 x 6 mm Ā (1 x 3/4 x 1/4ā) Cavity volume: 2.25 mL Ā (0.075 fl oz) Approximate Weight: 3 - 3.5 grams (0.10 - 0.12 oz)
