Automatic

Automatic Candy Demolder New!

$10,468.00 – $12,167.00

NOW IN STOCK! Fully Electric! Plug & Play Anywhere - No Compressed Air Required The Automatic Candy Demolder is designed to remove a full sheet of candies from molds in one “pop”. Unmold your trays in second! Ideal for Hard Candy, Gummies, Caramels, Chocolate, Caramel, Taffy and more! The automatic mold “Popper” includes one standard mold frame to match the Truffly Made mold you are using. Please note that molds are not included. Custom mold plates are available for additional 1,699 USD to work with your silicone molds* Unmolding Rate: 15,000+ pieces per hour Adjustable Speed Dimensions: 27.16” W x 38.58” L x 27.56” H

*The Automatic Candy Demolder is compatible with most Truffly Made molds and Non-Truffly Made molds as long as the cavities can be popped inside-out completely and minimum 8mm spacing between each cavities.

Maximum cavities per mold = 80

Maximum Mold size = 11.5 x 15”

Please contact info@trufflymade.com for a custom quote LARGE PIN FITTINGS AVAILABLE HERE ☜ Please select the type of mold you are using from the list, All Truffly Made molds listed are compatible with the demolder. For any silicone mold not listed, or is from a different manufacturer, please contact us before placing an order to verify compatibility.

Automatic Depositor Tower Rack System New!

$79,991.00

PRE-ORDER NOW! . The Automatic Depositing Tower Rack System comes with the 20 liters Automatic Depositor for Chocolate, Gummy, Caramel, Hard Candy and more! Each Tower Rack is on heavy duty caster wheels and can effortlessly be rolled around on any surface even when fully loaded.

Load up to 28 molds in each Tower Rack
Connect the Tower Racks to the middle table on which the Automatic Depositor is sitting
Fill the hopper of the Automatic Depositor with your product, then start the cycle.
The system will run autonomously during the entire cycle - No supervision required.
It will take from 10 to 20 min (depending on mold layout and volume per cavity) to fill all molds that will be automatically recovered and stacked in the second Tower Rack.

This system is designed to work with all Truffly Made silicone molds, as well non-Truffly Made molds (Programming fee applies), it delivers accurately metered fillings with great flexibility and can deposit 10,000+ pieces per hour. REMELTING PRODUCT SUCH AS "Albanese Gummies®" IS NOT COMPATIBLE WITH THIS SYSTEM DUE TO VISCOSITY BEING TOO HIGH. For a Professional and Certified remelting process please refer to: - LorAnn Oils Gummy Mix - Melt To Make™ - Candy Pros Contact us for mold compatibility: Info@trufflymade.com PRE-ORDER TERMS: Available in September 2024 50% Deposit Required : Automatic Depositor, 30 Tray Pallets and 60 Silicone Molds will be shipped immediately. Remaining 50% due prior shipping the Tower Rack System (including Middle Table)

Green Conveying Cables for Automatic Depositor

$316.94

Set of 2 green rubber cables for Automatic Depositor

Heated Panels For 20L Hopper

$3,970.46

Set of 2 Heating Panels for the Truffly Made Automatic Depositor. Includes:

Heating Element Front
Heating Element Back

Hopper 20L sold separately/ Insulated Panels sold separately. Heating Block sold separately. Quick Connect Cables sold separately.

Heating Block for Automatic Depositor

$3,464.00

Heating Block for the Truffly Made Automatic Depositor Large Power Cable sold separately Quick Connect cables sold separately

Hex Key Set for Depositor

$24.62

Hex Key Set to fit screws on the Universal and Automatic Depositors. Remove and replace screws when servicing the Universal and Automatic Depositor. Set of 7 Hex Keys

Hex Screw Set for Automatic Depositor – 8 Pack

$29.47

Replacement Screws for Automaic Depositor ONLY Replacement screws for attaching the Automatic Depositor transporter unit to body. 2x front, 2x side and 4x rear. Pack of 8 screws

20 litre hopper with lip for automatic depositor

Hopper 20L with lid

$4,736.00

Additional stainless steel Hopper for the Truffly Made Automatic Depositor 5.3 gallon / 20 liter capacity Includes: Lid, Valve Sleeves, Metallic Precision Balls Heating panels not included Not Suitable For Universal Depositor

Insulated Panels For 20L Hopper

$952.94

Set of 2 Insulated Panels for the Truffly Made Automatic Depositor. Includes:

Insulated Element Front
Insulated Element Back

Hopper 20L sold separately. Heating Panels sold separately. Heating Block sold separately.

Large Power Cable

$740.94

Large Power Cable for the Truffly Made Automatic Depositor’s heating block

Metal Precision Balls – Set of 10

$238.50

Set of 10 replacement metallic precision balls for Hopper on the Automatic, Universal and XL Depositor Priced one set of 10 Precision balls.

Quick Connect Cables For Heating Panels

$316.94

Set of 2 Quick Connect Cables for the Truffly Made Automatic Depositor’s heating panels Not Suitable For Universal Depositor

Rubber Feet for Universal Depositor – 10 Pack

$157.78

Replacement Rubber Feet for Universal Depositor, XL Depositor, Semi-Automatic and Compact Depositor Also compatible for Control Unit Rubber Feet located on the bottom (6) and back (4) of the depositor. Pack of 10 Rubber Feet How to apply:

Remove old rubber feet
Clean surface area with isopropyl alcohol
Apply new rubber feet by peeling the back of the 3M double sided tape

Silicone Mat for Automatic Depositor

$19.05

The Truffly Made Silicone Mat is designed to be placed under the tray of the Automatic Depositor by the nozzles to allow easy cleaning and care of the transporting unit base Reference: TM-MC-AM Mold Size : 216 x 340 mm (8.5” x 13”) Mold Layout: N/A Cavities Per Mold: N/A Cavity Size: N/A Cavity volume: N/A

Sliding Bar For Automatic Depositor

$931.74

Sliding bar for the Truffly Made Automatic Depositor 10 slots for pistons

Stainless Steel Tray Pallet For Automatic Depositor

$126.14

Additional stacking Stainless Steel trays with handle for the Automatic Depositors. ONLY FITS Automatic Depositors, NOT SUITABLE FOR XL OR 6L DEPOSITOR.

Stainless Steel Tray Pallet For Automatic Depositor – 10 PACK

$1,261.40

Pack of 10 additional stacking stainless steel trays with handle for the Automatic Depositor.

Touchscreen Control Unit

$5,054.00

7 inch Touchscreen Control Unit for the Automatic Depositor New Touchscreen Control Unit with Active LCD Touch Technology for control of the Automatic Depositor -Pre-programmed with all Truffly Made Molds - Option to program your own mold (additional cost may apply) - Pistons and Hopper temperature adjustement - Depositing volume adjustement - Pistons Prime mode - USB Port for mold import and software updates Only for Automatic Depositor

Transporting Unit for Automatic Depositor

$17,489.00

Main transporting unit for Automatic Depositor Includes:

Main Unit
White Pullies Set
Green Rubber Cables Set
Guides for Tray Pallets

Easy replacement “Plug & Play”

Universal depositor maintenance video pack

Universal Depositor – Maintenance Video Tutorials

$68.91

In this collection of Depositor Maintenance videos we are teaching you how to properly maintain your Universal Depositor 6L and XL.

All new spare parts can be purchased HERE ☜

Each video explains in detail how to replace several components of the depositor such as:

.

- Rotating Discs Replacement

- Front Bar Level

- Cables for Control Unit Replacement

- Hydraulic Pump Replacement

- Slider Bar Replacement

- Cables with Cylinder Replacement and Adjustment

.

Each topic explicitly shows and demonstrate how to operate and list the appropriate tools to be used.